Overstock - Luxury Chevre Goatskin (HIDES) - 50% OFF!
PRODUCT SPECS
- Article: Luxury Chevre Goatskin
- Tannery: France 🇫🇷
- Full Grain: Yes
- Firmness: Medium (5/10)
- Cut: Whole Hide
- Grain (Top): Lightly Pebbled, A special hand boarding process creates a unique slightly distinct grain
- Flesh (Bottom): Smooth Nap
- Dye: Completely Through
- Burnishing: Yes, with Tokonole, but edge paint is recommended
- Thickness: 3.5oz (1.4mm) +/- 0.2mm
- Splitting: Yes, down to 0.6mm *Please note split leather can not be returned
- Yield: 85%+, Whole hides have bellies which can have some loose grain. Overall very nice
- ReStock: Limited Offer!
- Luxury Brands: Yes, used by some of the top luxury brands for handbags and small leather goods
- Volume Discount: Yes, mix and match any sizes & colors together. See table above
ADDITIONAL DETAILS
This is a beautiful article and is produced in a special 23-step process which takes 4 weeks to produce. One of the most critical processes involves hand boarding each hide to increase the depth and structure of the grain, providing a unique and distinctive look.
This goat leather article is their top grade. The leather is tanned in a full veg-tanned crust and then retanned and dyed with some mineral tannage to add softness and strength at thinner thicknesses. This process is the key to achieving its distinct grain, soft yet structured feel and even consistent color.
When you combine the unique grain, great temper, durability and beautiful consistent colors across the entire hide, you will see why it is a staple amongst the top brands.
USES
Small leather goods, bags, wallets, linings & book covers
*Please note some hides have a more narrow clean center area than others. Please confirm with us before splitting if you have any size limitations and we can ensure you will receive the right hide.
DIMENSIONS & PRICING
- Medium: ~4-5 square feet - $39.99
- Large: ~5-6 square feet - $49.99
- X-Large: ~6+ square feet - $59.99
THICKNESS
- 3.5oz (1.4 +/- 0.2mm)
LEATHER SPLITTING
- Leather splitting is a custom service available down to your preferred thickness
- Please note split leather can't be returned
- There is a tolerance to leather splitting. While we have invested a lot of time and training into hitting a tighter tolerance range than advertised, sometimes the leather articles and differing densities require the full tolerance range.
- Leather tolerance is denoted by +/- which means the leather can be both above and below that number by the denoted amount.
- Example 1.2mm +/- 0.1mm.
- This means that the leather could come anywhere ranging from 1.1-1.3mm across the hide. Most the time this amount is indiscernible to the naked eye, but should be noted if measuring with precise equipment
- How we gauge the leather is with a thickness gauge that can reach both the edges and middle of the hide. We apply a moderate amount of pressure (Not too hard and not too soft)
- Again our tolerances are tighter than the tanneries. We are usually well inside the range, especially on panels, but occasionally need the full range. Tolerance ranges are as follows:
- Splitting Panels: +/- (0.1mm).
- Splitting Full Hides & Half Hides: +/- 0.15mm
- No Splitting (From Tannery Splitter): +/- 0.2mm
- The width of our splitter is 30 inches. If you have a hide that is larger we will trim the hide to fit and return you both pieces. We cut off the belly section leaving you the nicest area of the hide in tact.
- Due to it requiring often multiple passes we do not send the split flesh part.
WHOLESALE
We can offer the following discounts on Full Hides (Whole Hides)
- Buy 3 Full Hides (Mix ANY Color): 4% Off
- Buy 6 Full Hides (Mix ANY Color): 5% Off
- Buy 10 Full Hides (Mix ANY Color): 7% Off
- Buy 20 Full Hides (Mix ANY Color): 10% Off
- Buy 25 Full Hides (Single Color): Contact us for Tannery Direct
WHAT TO EXPECT?
- Will my hide/panel be perfect? READ BEFORE PURCHASING
- Shipping and Return Info HERE
This is the detail