Alran - Chevre "PatNat" - Rustic Goat Leather (HIDES)

Alran - Chevre "PatNat" - Rustic Goat Leather (HIDES)
Alran - Chevre "PatNat" - Rustic Goat Leather (HIDES)
Alran - Chevre "PatNat" - Rustic Goat Leather (HIDES)
Alran - Chevre "PatNat" - Rustic Goat Leather (HIDES)
Alran - Chevre "PatNat" - Rustic Goat Leather (HIDES)
Alran - Chevre "PatNat" - Rustic Goat Leather (HIDES)

Alran (France)

3 reviews
3 reviews
$ 59.99 USD
Discount: Mix and match ANY Alran articles to get the volume discount above!

    PRODUCT SPECS

    • Article:  Patnat 
    • Tannery: Alran 🇫🇷 (France)
    • Full Grain: Yes + Black Brush Off Finish
    • Firmness: Medium (5/10)
    • Cut: Whole Hide
    • Grain (Top): Rustic Texture + Black Brush Off Finish
    • Flesh (Bottom): Smooth Nap
    • Dye: Completely Through 
    • Burnishing: Yes, with Tokonole, but edge paint is recommended
    • Thickness: 2.5oz (1.1mm) +/- 0.2mm
    • Splitting: Yes, down to 0.6mm *Please note split leather can not be returned
    • ReStock: Yes, restocked every 2 months

    ADDITIONAL DETAILS

    Founded in 1903 in the South of Tarn and set in the beautiful surroundings of the "Montagne Noire" (the black mountains), the tannery Alran S.A.S. has developed a vast expertise in the tanning of goat skins. They are well renown in the luxury community and have many articles used by the top luxury handbags, small leather goods and watch straps houses.

    Chevre "Patnat" is one of Alran's most unique articles and is produced in an a labor intensive 23-step process which takes 4 weeks to produce. This article has a unique natural and rustic grain. The grain has deeper shrunken areas with black inside to create a deep contrast look. 

    This goat leather is their top grade. The leather is tanned in a full veg-tanned crust and then retanned and dyed with some mineral tannage to add softness and strength at thinner thicknesses. This process is the key to achieving its distinct grain, soft yet structured feel and even consistent color. 

    USES 

    Small leather goods, bags, linings & book covers

    *Being full aniline there can be some contrast along the center of the back. This is normal and something book binders and wallet makers try to place this along the fold in the book or wallet.  Please confirm with us before splitting if you have any size limitations and we can ensure you will receive the right hide.

    DIMENSIONS & PRICING

    • Medium: ~4 square feet
    • Large: ~4.5 square feet
    • X-Large: ~5 square feet
    • 2X-Large: ~5.5 square feet
    • 3X-Large: ~6 square feet
    • 4X-Large: ~6.5 square feet
    • 5X-Large: ~7 square feet
      • Please note we can not control the range of sizes we receive. Most of the time the sizes are in the Large-2XL range. The larger sizes are more rare

    THICKNESS

    • 2.75oz (1.1mm +/- 0.2mm)

    LEATHER SPLITTING

    • Leather splitting is a custom service available down to your preferred thickness
    • Please note split leather can't be returned
    • There is a tolerance to leather splitting. While we have invested a lot of time and training into hitting a tighter tolerance range than advertised, sometimes the  leather articles and differing densities require the full tolerance range. 
    • Leather tolerance is denoted by +/- which means the leather can be both above and below that number by the denoted amount.
      • Example 1.2mm +/- 0.1mm.
      • This means that the leather could come anywhere ranging from 1.1-1.3mm across the hide. Most the time this amount is indiscernible to the naked eye, but should be noted if measuring with precise equipment
    • How we gauge the leather is with a thickness gauge that can reach both the edges and middle of the hide. We apply a moderate amount of pressure (Not too hard and not too soft)
    • Again our tolerances are tighter than the tanneries. We are usually well inside the range, especially on panels, but occasionally need the full range. Tolerance ranges are as follows: 
      • Splitting Panels: +/- (0.1mm).
      • Splitting Full Hides & Half Hides:  +/- 0.15mm
      • No Splitting (From Tannery Splitter):  +/- 0.2mm
    • The width of our splitter is 30 inches. If you have a hide that is larger we will trim the hide to fit and return you both pieces. We cut off the belly section leaving you the nicest area of the hide in tact.
    • Due to it requiring often multiple passes we do not send the split flesh part.

      WHOLESALE

      We are the Official North America distributor for Alran. You can mix and match any of the Alran Articles (Sully, Liege Main, Native, Caviar, Saffiano, Fatnat and Indigo) to get the discount below on Full hides. We can offer the following discounts on Full Hides (Whole Hides) 

      • Buy 3 Full Hides (Mix ANY Alran Article): 4% Off
      • Buy 6 Full Hides (Mix ANY Alran Article): 5% Off
      • Buy 10 Full Hides (Mix ANY Alran Article): 7% Off
      • Buy 20 Full Hides (Mix ANY Alran Article): 10% Off
      • Buy 25 Full Hides (Single Alran and Color): Contact us for Tannery Direct

      WHAT TO EXPECT?