Conceria Walpier - Dollaro - Veg Tanned Leather (PANELS)
**Next Shipment Arriving - End of May**
This listing is for PANELS for HIDES click HERE
PRODUCT SPECS
- Article: Dollaro
- Tannery: Conceria Walpier 🇮🇹 (Italy)
- Full Grain: Yes
- Tannage: Vegetable Tanned
- Cut: Double Shoulder (No Belly = Higher Yield)
- Grain (Top): Pebbled
- Flesh (Bottom): Smooth Nap
- Firmness: Firm 8/10
- Dye: Completely Through
- Finish: Full Aniline
- Burnishable: Yes
- Thickness: 5oz (2.0mm) +/- 0.2mm
- Splitting: Yes, down to 0.6mm *Please note split leather cannot be returned
- Restocked: Yes, every 3-4 months
ADDITIONAL DETAILS
Dollaro Vegetable Tanned Leather comes from Conceria Walpier Tannery in Tuscany, Italy. They are well known for their traditional methods of vegetable tanning with tree barks that go back 100's of years. Walpier is a member of the exclusive Pelle Vegetale Consortium certifying they tan leather using the strict traditional vegetal methods. We offer serialized certification tags you can attach to your finished products HERE
The Dollaro veg tan is a really unique and beautiful article. The grain has a beautiful flat pebble texture and in certain colors like Red, Orange Natural, Taupe and whiskey there is a nice 2 tone finish. The temper is firm from the print and gives a nice rigidity and structure to your products. The cut is a double shoulder with high yield and almost no waste. Their beautiful colors will provide near endless color options and combinations to your projects.
DIMENSIONS & PRICING
- Panel: 2 square feet (12 x 24 inches): $39.99 panel
- Panel: 1 square feet (12 x 12 inches): $21.99 panel
- Panel: 1 square feet (9 x 16 inches): $21.99 panel
- Full Shoulders click HERE
THICKNESS
- 5oz (2mm +/- 0.2mm)
LEATHER SPLITTING
- Leather splitting is a custom service available down to your preferred thickness
- Please note split leather can't be returned
- There is a tolerance to leather splitting. While we have invested a lot of time and training into hitting a tighter tolerance range than advertised, sometimes the leather articles and differing densities require the full tolerance range.
- Leather tolerance is denoted by +/- which means the leather can be both above and below that number by the denoted amount.
- Example 1.2mm +/- 0.1mm.
- This means that the leather could come anywhere ranging from 1.1-1.3mm across the hide. Most the time this amount is indiscernible to the naked eye, but should be noted if measuring with precise equipment
- How we gauge the leather is with a thickness gauge that can reach both the edges and middle of the hide. We apply a moderate amount of pressure (Not too hard and not too soft)
- Again our tolerances are tighter than the tanneries. We are usually well inside the range, especially on panels, but occasionally need the full range. Tolerance ranges are as follows:
- Splitting Panels: +/- (0.1mm).
- Splitting Full Hides & Half Hides: +/- 0.15mm
- No Splitting (From Tannery Splitter): +/- 0.2mm
- The width of our splitter is 30 inches. If you have a hide that is larger we will trim the hide to fit and return you both pieces. We cut off the belly section leaving you the nicest area of the hide in tact.
- Due to it requiring often multiple passes we do not send the split flesh part.
WHOLESALE
We are the Official North America distributor for Conceria Walpier. We can offer the discounts on FULL HIDES (Double Shoulders)
WHAT TO EXPECT?
- Will my hide/panel be perfect? READ BEFORE PURCHASING
- Shipping and Return Info HERE
This is the detail